Adapters

Fluke LTE Module for the 177X
Model: LTE MODULE

For data transmission/access via the cell phone network, this LTE module allows communication with 177X multimeters (the multimeter must be close enough to a compatible cell tower). In addition,...

Fluke MBX-USB-RS232 USB to Serial RS232 Adapter, EP0328Z
Model: MBX-USB-RS232

For use with the Disturbance Analyzers.

Fluke NORMA-32A-CABLES Cables for 32A Planar Shunt
Model: NORMA-32A-CABLES

For use with Norma series Power Analyzers.

Fluke NORMA-STAR-POINT External Star Point Adapter
Model: NORMA-STAR-POINT

For use with Norma series Power Analyzers.

Fluke P3100SK Seal Kit for P3100 Series Deadweight Testers
Model: P3100SK

Properly seal your existing P3100 Series deadweight tester with help from this seal kit.

Fluke P5540 Adapter Set for Select Deadweight Testers, Metric
Model: P5540

Expand your deadweight tester's capability with this metric adapter set, which includes M14 x 1.5, M20 x 1.5, 1/8 and 1/4 BSP adapters.

Fluke P5541 Adapter Set for Select Deadweight Testers, BSP
Model: P5541

Expand your deadweight tester's capability with this BSP adapter set, which includes 1/8, 1/4, 3/8 and 1/2 BSP adapters.

Fluke P5542 Adapter Set for Select Deadweight Testers, NPT
Model: P5542

Expand your deadweight tester's capability with this NPT adapter set, which includes 1/8, 1/4, 3/8 and 1/2 NPT adapters.

Fluke P5543 Angle Adapter for Select Deadweight Testers
Model: P5543

Expand your deadweight tester's capability with this angle adapter, which uses the standard gauge adapters and positions the gauges at 90º.

Fluke P5551 Pointer Remover/Punch for Select Deadweight Testers
Model: P5551

Remove and refit a pressure gauge's pointer both consistently and quickly using this deadweight tester's pointer remover/punch.

Fluke PK-2271A-NPT-HC20 Lines & Fittings Kit for 2271A-NPT-HC20
Model: PK-2271A-NPT-HC20

Lines & Fittings Kit for 2271A-NPT-HC20

Fluke PK-ADPTR-HC20 Adaptor Set for Standard Test Port, 20MPA
Model: PK-ADPTR-HC20

Adaptor Set for Standard Test Port, 20MPA

Fluke PK-ADPTR-P3K Adaptor Set for P3000 Test Port, 20MPA
Model: PK-ADPTR-P3K

Adaptor Set for P3000 Test Port, 20MPA

Fluke PM9093 Male BNC to Dual Female BNC Adapter
Model: PM9093/001

Fluke PPA9159-CAL Fine Increment Weight for kPa, mPa, bar or kgf/cm2 Weight Sets
Model: PPA9159-CAL

This fine increment weight set is designed for use with select kPa, mPa, bar and kgf/cm2 weight sets.

Fluke PPA9608-CAL Incremental Weights for psi Weight Sets
Model: PPA9608-CAL

This incremental weight set is designed for use with select psi weight sets.

Fluke SB-500 Shaft Brushes Set for the SVS-500 and MDA-500 Series
Model: SB-500

For use with MDA-500 Motor Drive Analyzer models.

Fluke SPVML-2L Solmetric PV Module Ladder-Pulley System, 80' rope
Model: SPVML-2L

Specifically designed as an economical system for getting PV modules on rooftops quickly and safely without damaging them, this lift is compatible with fiberglass extension ladders from Werner and...

Fluke SPVML-2M Solmetric PV Module Ladder-Pulley System, 60' rope
Model: SPVML-2M

Specifically designed as an economical system for getting PV modules on rooftops quickly and safely without damaging them, this lift is compatible with fiberglass extension ladders from Werner and...

Fluke SVS-500 Shaft Voltage Set and Magnetic Base for the MDA-500 Series
Model: SVS-500

For use with MDA-500 Motor Drive Analyzer models.