Equipped with piston flotation indicators, this water deadweight tester has a 10 to 10,000psi range.
Equipped with piston flotation indicators, this water deadweight tester has a 0.1 to 70mPa range.
Equipped with piston flotation indicators, this water deadweight tester has a 1 to 700kgf/cm2 range.
Equipped with piston flotation indicators, this water deadweight tester has a 1 to 700bar range.
Featuring a mounted spirit level and a test station design with O-rings, this water deadweight tester helps eliminate the need for wrenches or PTFE tape. The unit features a 10 to 5,000psi range.
Featuring a mounted spirit level and a test station design with O-rings, this water deadweight tester helps eliminate the need for wrenches or PTFE tape. The unit features a 0.1 to 35mPa range.
Featuring a mounted spirit level and a test station design with O-rings, this water deadweight tester helps eliminate the need for wrenches or PTFE tape. The unit features a 1 to 350kgf/cm2 range.
Featuring a mounted spirit level and a test station design with O-rings, this water deadweight tester helps eliminate the need for wrenches or PTFE tape. The unit features a 1 to 350bar range.
The weight masses of this water deadweight tester are kept safe during transport, since they're stowed in a sturdy case with a self-locking mechanism for added protection. The tester has a 200 to 10,000psi range.
The weight masses of this water deadweight tester are kept safe during transport, since they're stowed in a sturdy case with a self-locking mechanism for added protection. The tester has a 2 to 70mPa range.
The weight masses of this water deadweight tester are kept safe during transport, since they're stowed in a sturdy case with a self-locking mechanism for added protection. The tester has a 20 to 700 kgf/cm2 range.
The weight masses of this water deadweight tester are kept safe during transport, since they're stowed in a sturdy case with a self-locking mechanism for added protection. The tester has a 20 to 700bar range.
The O-rings on this water deadweight tester's test station design help eliminate the need for PTFE tape or wrenches, and the unit's 100 to 5,000psi range is suitable for a wide range of applications.
The O-rings on this water deadweight tester's test station design help eliminate the need for PTFE tape or wrenches, and the unit's 1 to 35mPa range is suitable for a wide range of applications.
The O-rings on this water deadweight tester's test station design help eliminate the need for PTFE tape or wrenches, and the unit's range up to 350kgf/cm2 is suitable for a wide range of applications.
The O-rings on this water deadweight tester's test station design help eliminate the need for PTFE tape or wrenches, and the unit's 10 to 350bar range is suitable for a wide range of applications.
With operating fluids that are made up of either distilled or deionized water, this water deadweight tester has a range from 10 to 500psi.
With operating fluids that are made up of either distilled or deionized water, this water deadweight tester has a range from 0.1 to 3.5mPa.
With operating fluids that are made up of either distilled or deionized water, this water deadweight tester has a range from 100 to 3,500kPa.
With operating fluids that are made up of either distilled or deionized water, this water deadweight tester has a range from 1 to 35kgf/cm2.
We accept these payment methods:
We also accept wire transfers/EFT, cheques and purchase orders on approved credit. Accepted payment methods vary by country.
