Model: 62-MAX+/323/1AC | Order No: 62MAX+/323/1AC
The products in this kit are designed to increase the productivity and efficiency of electricians and HVAC/R technicians. Users can perform non-contact temperature measurements with the infrared thermometer. Afterward, they can use the clamp meter and voltage detector to take measurements on non-linear signals.
This kit is designed to help electricians and HVAC technicians solve problems quicker. Test first for overheated electrical devices using an IR thermometer; then use the clamp meter and voltage detector to find out more about the problem
Designed with your on-the-job needs in mind, the new Fluke 62 MAX and 62 MAX + infrared thermometers are everything you'd expect from the experts in measurement tools. Small in size, extremely accurate and very easy to use. IP54 rated for dust and water resistance. Precise yet rugged enough to take a 3-meter drop. In fact, the 62 MAX and 62 MAX + are so tough, they're the only IR thermometers around you can handle without care.
If you've ever used an infrared thermometer, then you may have been fooled regarding the temperature reading. That's because IR thermometers project a measurement cone at a surface and take the average temperature of the cone at the target. Although most IR thermometers have a laser pointer, a laser is a line, not a cone, and you may think that you're getting temperature at the laser point only. Fluke's 62 Max+ uses two rotating laser pointers that show you the size of the measurement area. It covers the temperature range from -30°C to 650°C with a response time less than 300 ms. The Model 62 Max uses a single laser pointer and covers the temperature range from -30°C to 500°C.
The Max 62 and Max 62+ are designed to withstand drops up to 3 m. Is screen is located in a position and with a viewing angle (15°) that, in many cases, lets you see the display without having to move the thermometer from the measuring point. For most measurements, you simply pull the trigger once you've identified the measurement point.
Temperature is often the first indication of potential problems in electrical and mechanical applications. But how can you easily determine if an electrical panel has a hot spot, a motor is overheating or an HVAC system is inefficient? The answer is with an infrared (IR) thermometer. With handheld, non-contact IR thermometers, you can instantly measure equipment temperatures in hard-to-reach or hazardous areas. And with early detection of abnormal temperatures comes early correction of problems.
Designed with your on-the-job needs in mind, the new Fluke 62 MAX and 62 MAX+ infrared thermometers are everything you'd expect from the experts in measurement tools: small in size, extremely accurate and very easy to use. IP54 rated for dust and water resistance. Precise yet rugged enough to take a 3-meter drop. In fact, the 62 MAX and 62 MAX+ are so tough, they're the only IR thermometers around you can handle without care.
True-rms measurements and optimized ergonomics make the 320 Series Clamp Meters the best general troubleshooting tools for commercial and residential electricians. The Fluke 323 model is ideally suited for current measurements up to 400 A in tight cable compartments.
The next generation VoltAlert™ AC non-contact voltage testers from Fluke are easy to use - just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there's voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home.
| Temperature Range | -22 to 1202°F (-30 to 650°C) |
| Accuracy | ±34.7°F (±1.5°C) or ±1.5% of reading, whichever is greater 14 to 32°F (-10 to 0°C): ±2.0 -22 to 14°F (-30 to -10°C): ±3.0 |
| Response Time (95%) | <500 ms (95% of reading) |
| Spectral Response | 8 to 14 microns |
| Emissivity | 0.10 to 1.00 |
| Optical Resolution | 12:1 (calculated at 90% energy) |
| Display Resolution | 0.2°F (0.1°C) |
| Repeatability of Readings | ±0.8% of reading or <±2°F (1.0°C), whichever is greater |
| Power | AA Battery |
| Battery Life | 8 hours with laser and backlight on |
| Operating Temperature | 32 to 122°F (0 to 50°C) |
| Storage Temperature | -4 to 140°F (-20 to 60°C), without battery |
| Operating Humidity | 10% to 90% RH non-condensing at 86°F (30°C) |
| Operating Altitude | 6561.7' (2000 m) above mean sea level |
| Storage Altitude | 39,370.08' (12,000 m) above mean seal level |
| Drop Test | 9.8' (3 m) |
| Dimensions | 6.88 x 3.34 x 2.95" (175 x 85 x 75 mm) |
| Weight | 0.56 lbs (255 g) |
| IP Rating | IP 54 per IEC 60529 |
| Vibration and Shock | IEC 68-2-6 2.5 g, 10 to 200 Hz, IEC 68-2-27, 50 g, 11 ms |
| EMC | EN 61326-1:2006 EN 61326-2:2006 |
| Standards and Agency Approval | Compliance: EN/IEC 61010-1: 2001 Laser safety: FDA and EN 60825-1 Class II |
This dust and water-resistant infrared thermometer is extremely accurate and very easy to use. Its precise, yet rugged enough to take a 3-meter drop.
Designed to perform in the toughest environments and provides you with reliable results, this True RMS clamp meter allows access in tight areas due to its slim, compact size. It is ideal for identifying the presence of load current, AC voltage, and continuity of circuits, switches, fuses, and contacts.
Continually tests its battery and circuit integrity with a periodic double flash visual indication. A Category IV - 1000V over voltage rated product for added user protection, the highest rated of its kind.
Click on a category to view a selection of compatible accessories with the Fluke 62 MAX+/323/1AC IR Thermometer, Clamp Meter and Voltage Detector Kit.
We accept these payment methods:
We also accept wire transfers/EFT, cheques and purchase orders on approved credit. Accepted payment methods vary by country.
