Ask an Expert

Fluke PM9604 GPIB interface

Model: PM9604/00

Be the first to review this product

For use with the PM6662/6665/6666/6669.

Discontinued!

This product has been discontinued and is no longer available. There are no replacement options.

We can help you find what you need:

Specifications
Included

Fluke PM9604/00 Specifications

General Specifications

Programming code format

7-bit ISO code (ASCII) characters. Upper or lower case characters.

Input separator

The counter accepts the following separators: ETX, ETB, CR, LF, ' '(space), ',' (comma), ':' (colon) ';' (semicolon)

Output data separator

Default separator at power-on is LF. The separator can be programmed to any non-printable ASCII-code with decimal equivalent 0-31, except 27 (ESC). The combination 13 + 10 (CR + LF) can be programmed. The EOI line can be programmed to be active together with the last output byte sent.

Output format

Normal	20 characters plus separators(s) 7 characters alphabetic header plus 13 characters numeric value
Short output	Alphabetic header and leading zeroes are omitted.

High-speed dump

	The contents of internal registers are transferred to the controller, without being processed by the counter. The processing must be done in the controller instead.
Max output rate	approx 100 readings/s
Output format	A 2 character header, followed by 12 Hex-digits plus separator(s)

Max data output rate

Normal mode	Approx 5 readings/s
High-speed dump	Approx 100 readings/s

Output time for measuring data

Normal mode	Approx 15 rms (20 bytes)
High speed mode	Approx 6 ms (15 bytes)

Response time for addressing

Approx 600 ms

Response time for trigger command (GET)

Approx 10 ms

Typical read time for programming data

Approx. 1 ms/byte

What's included with the Fluke PM9604/00

Fluke PM9604 GPIB interface

Accessories

Click on a category to view a selection of compatible accessories with the Fluke PM9604 GPIB interface.

Carrying Cases

Fluke TB25 Tool Bucket Organizer Bag, 5.2 gal TB25

Durable and rugged, this tool bucket organizer bag has a 5.2-gallon capacity that can be relied on to protect and safely carry a variety of test tools and accessories. With its waterproof hard bottom shell, this versatile organizer has a total of 28 pockets that can fit hand tools, DMMs, clamp meters, test probes, and more.