Ask an Expert

Fluke i30 AC/DC Current Clamp

Model: I30

Be the first to review this product

Hall Effect technology. Features a Current range of 20A, a measuring range of ±30A, and an Output of 100 mV/A.

Traceable Calibration Certificate for your I30 AC/DC Current Clamp

Yes, I would like to add a Traceable Calibration Certificate (Model CERTICM1) for only $105.00 CAD

$798.69 CAD

was $979.99

Availability:
2 to 3 Weeks

Fluke I30 Offers

The Fluke i30 current clamp is based on Hall Effect technology for use in measurement of both DC and AC current. The i30 may be used in conjunction with multimeters, recorders and other suitable recording instruments for accurate non-intrusive current measurement.

Fluke I30 Specifications

Electrical specifications

Current range

20 A ac rms or dc

Measuring range

± 30 A

Output sensitivity

100 mV/A

Accuracy (at +25 °C)

± 1 % of reading ± 2 mA

Resolution

± 1 mA

Load impedance

> 10 k Ohms and ≤ 100pF

Conductor position sensitivity

± 1 % relative to center reading

Frequency range

DC to 20 kHz (- 0.5 dB)

Temperature coefficient

± 0.01 % of reading/°C

Power supply

9 V Alkaline, MN1604/PP3, 30 hours, low battery indicator

Working voltage (see Safety Standards section)

300 V ac rms or dc

General Specifications

Maximum conductor size

19 mm diameter

Output connection

4 mm safety connector

Output zero

Manual adjust via thumbwheel

Cable length

1.5 meters

Operating temperature range

0 °C to +50 °C

Storage temperature range (with battery removed)

-20 °C to +85 °C

Operating humidity

15 % to 85 % (non-condensing)

Weight

250 g

Safety standards

	BS EN 61010-1:2001
	BS EN 61010-2-032:2002
	BS EN 61010-031:2002
	300 Vrms, Category III, Pollution Degree 2
	Use of the probe on uninsulated conductors is limited to 300 V ac rms or dc and frequencies below 1 kHz.

EMC Standards

EN 61326: 1998 +A1, A2, & A3

What's included with the Fluke I30

Fluke i30 AC/DC Current Clamp

Accessories

Click on a category to view a selection of compatible accessories with the Fluke i30 AC/DC Current Clamp.

Carrying Cases

Fluke TB25 Tool Bucket Organizer Bag, 5.2 gal TB25

Durable and rugged, this tool bucket organizer bag has a 5.2-gallon capacity that can be relied on to protect and safely carry a variety of test tools and accessories. With its waterproof hard bottom shell, this versatile organizer has a total of 28 pockets that can fit hand tools, DMMs, clamp meters, test probes, and more.