Ask an Expert

Fluke i3000s Flex-36 AC Current Clamp, 36 inch length

Model: I3000S-FLEX-36

36" length, 3000A max, switchable current range for 30A, 300A or 3000A using a 1mA/A, 10mV/A or 100mV/A output and BNC connector.

Traceable Calibration Certificate for your I3000S-FLEX-36 Flex-36 AC Current Clamp

Yes, I would like to add a Traceable Calibration Certificate (Model CERTICM1) for only $105.00 CAD

$1,324.39 CAD

Availability:
3 to 4 Weeks

Fluke I3000S-FLEX-36 Offers

The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas.

Features

Three Ranges: 30A, 300A, and 3000A with 1, 10, or 100 mV/A output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor diameter 178 mm (7 in.)
CAT III 600 V safety rating

Fluke I3000S-FLEX-36 Specifications

Electrical specifications

Current ranges

	30 A
	300 A
	300 A
	AC rms

Output sensitivity (AC-coupled)

	1 mV per A
	100 mV
	10 mV
	1 mV per A

Load impedance

100 kΩ minimum

Accuracy

at +25 °C

± 1 % of range (45 Hz to 65 Hz)

Linearity

10 % to 100 % of range

± 0.2 % of reading

Noise

	8 mV ac rms (30 A)
	2 mV ac rms (300 A, 3000 A)

Frequency range

10 Hz to 50 kHz (-3 dB)

Phase error

	< ± 1° (45 Hz to 65 Hz)
	± 10° (at 20 kHz)

Position sensitivity

with cable > 25 mm from the coupling

± 2 % of range

External field

with cable > 200 mm from the head

± 1 % of range

Power supply

2 x AA/MN 1500/LR6 Alkaline, , 400 hours, low battery indicator or dedicated external power supply

Temperature Coefficient

± 0.08% of reading per °C

Working voltage

see Safety standards section

600 V AC rms or DC

General Specifications

Head cable length (double insulated)

i3000s Flex	610 mm (24 in)
i3000s Flex-36	915 mm (36 in)

Head cable diameter

14.3 mm (0.56 in)

Head bend radius

38.1 mm (1.5 in)

Cable length (head to electronics)

2 m (6.56 ft)

Output connection

0.5 m cable terminated with safety BNC connector. Supplied with 4mm safety plug adapter

Operating temperature range

	-20 °C to +90 °C (-4 °F to 190 °F) (head)
	-20 °C to +85 °C (-4 °F to 185 °F) (electronics)

Storage temperature range

	-40 °C to +105 °C (-40 °F to 221 °F) (head)
	-20 °C to +85 °C (-4 °F to 185 °F) (electronics)

Operating humidity

15 % to 85 % (non-condensing)

Weight

	180 g (0.396 lb) (head)
	190 g (0.419 lb) (electronics)

Safety standards

	BS EN 61010-1: 2001
	BS EN 61010-2-032: 2002
	BS EN 61010-031: 2002
	600 Vrms, Category III, Pollution Degree 2
	Use of the probe on uninsulated conductors is limited to 600 V AC rms or dc and frequencies below 1 kHz.

EMC standards

EN 61326: 1998 +A1, A2, & A3

Maximum conductor size

610 mm or 914 mm, depending on model

What's included with the Fluke I3000S-FLEX-36

Fluke i3000s Flex-36 AC Current Clamp, 36 inch length

Accessories

Click on a category to view a selection of compatible accessories with the Fluke i3000s Flex-36 AC Current Clamp, 36 inch length.

Carrying Cases

Fluke TB25 Tool Bucket Organizer Bag, 5.2 gal TB25

Durable and rugged, this tool bucket organizer bag has a 5.2-gallon capacity that can be relied on to protect and safely carry a variety of test tools and accessories. With its waterproof hard bottom shell, this versatile organizer has a total of 28 pockets that can fit hand tools, DMMs, clamp meters, test probes, and more.