Ask an Expert

Fluke i6000s Flex-24 AC Current Probe

Model: I6000S-FLEX-24

Flexible 24" 6000A AC current probe with BNC terminated lead.

Fluke I6000S-FLEX-24 Offers

The Fluke i6000s Flex is an AC current probe utilizing the Rogowski principle. It can be used to measure currents up to 6000A when used in conjunction with oscilloscopes, recorders or data loggers. The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas.

Fluke I6000S-FLEX-24 Specifications

Electrical Characteristics
Current Ranges	60 A / 600 A / 6000 A ACRMS
Output Sensitivity (AC coupled)	50 mV /5mV / 0.5mV per A
Load Impedance	100 kOhm minimum
Accuracy (at +25°C)	±1% of range (45 - 65 Hz)
Linearity (10% to 100% of range)	±0.2% of reading
Noise	8mV ACRMS (60 A) 2 mV ACRMS (600/6000A)
Frequency Range	10 Hz to 50 kHz (- 3 dB)
Phase Error	< ±1° (45 - 65Hz), ±10° (at 20 kHz)
Position Sensitivity (with cable > 25mm from the coupling)	±2% of range
External field (with cable > 200mm from the head)	±1% of range
Power Supply	2 x AA MN 1500 LR6 alkaline 400 Hours, low battery indicator or dedicated ext power supply
Temperature Coefficient	±0.08% of reading per C
Working Voltage (see Safety Standards section)	600 V ACRMS or DC

General Characteristics

Head Cable length-(double insulated)

610mm (24") I6000s Flex-24
915mm (36") I6000s Flex-36

Head Cable Diameter

14.3 mm

Head Bend Radius

38.1 mm

Cable length (head to electronics)

2 meters

Output Connection

0.5 m cable terminated with
safety BNC connector
Supplied with 4mm safety plug
adaptor

Operating Temperature Range

-20 to +90 °C (head)
-20 to +85 °C (electronics)

Storage Temperature Range

-40 to +105 °C (head)
-20 to +85 °C (electronics)

Operating Humidity

15% to 85% (non condensing)

Weight

180 g (head), 190 g (electronics)

Safety Standards

BS EN 61010

1: 2001

BS EN 61010

2-032: 2002

BS EN 61010

031: 2002

600V_RMS, Category III, Pollution Degree 2

Note

Use of the probe on uninsulated conductors is limited to 600 V ACRMS or DC and frequencies below 1 kHz.

EMC Standards

BS EN 61326

1998 +A1, A2, & A3

What's included with the Fluke I6000S-FLEX-24

Fluke i6000s Flex-24 AC Current Probe

Accessories

Click on a category to view a selection of compatible accessories with the Fluke i6000s Flex-24 AC Current Probe.

Carrying Cases

Fluke TB25 Tool Bucket Organizer Bag, 5.2 gal TB25

Durable and rugged, this tool bucket organizer bag has a 5.2-gallon capacity that can be relied on to protect and safely carry a variety of test tools and accessories. With its waterproof hard bottom shell, this versatile organizer has a total of 28 pockets that can fit hand tools, DMMs, clamp meters, test probes, and more.