This recorder is fully compliant to IEC 61000-4-30 Class-A, for advanced power quality analysis and consistent compliance testing. Designed for analysis of utility and industrial power distribution systems, in medium and low-voltage networks. Provides exceptional flexibility with the ability to customize thresholds, algorithms, and measurement selections. It also captures the most comprehensive details on user-selected parameters; the supplied PQAnalyze application software enables users uses the in depth measurement and produce sophisticated analysis and reports.
Three-phase power quality recorder fully compliant to IEC 61000-4-30 Class-A and consistent with compliance testing
Uses GPS time synchronization to correlate data with events or datasets from other instruments with precision
Offers flexible and fully configurable thresholds and scale factors to allow users to define detailed criteria for detecting and recording disturbances
Provides uninterrupted power supply (40 minutes) so you'll never miss important events. Even records the beginning and end of interruptions and outages to help determine the cause
Provides continuous recording of voltage, current, power P, Q, S, power factor, kWh, flicker, unbalance, frequency, voltage and current harmonics to the 50th/Interharmonics, THD, and mains signalling
Provides 2 GB data memory to enable detailed, simultaneous recording of numerous power parameters for long periods of time
Includes comprehensive software that provides trend diagrams for root cause analysis, statistical summaries, report writing, and real-time data monitoring in the online mode
Allows quick plug and play setup with automatic sensor detection. Sensors are instrument powered, eliminating the need for batteries
Delivers reliable testing under nearly any conditions with rugged insulated housing and a solid state design that has no rotating components
Detailed disturbance analysis
Class-A quality-of-service compliance
Event correlation at multiple locations
Galvanic separation and DC coupling
Power quality and power load studies
Fluke 1760 TR US Specifications
Number of Inputs
8 galvanically isolated inputs for voltage and current measurements
Sensor Category Rating
up to 600 V CAT IV depending on sensor
Nominal Voltage (RMS)
Overload Capacity (RMS)
2 GB Flash Memory
Ethernet (100 MB/s), RS 232, external modem via RS 232
325 x 300 x 65mm (13 x 11.8 x 2.6")
Weight (without accessories)
Approx. 4.9kg (10.8lb)
AC: 83 to 264 V; 45 to 65 Hz
Max. 54 VA
NIMH, 7.2 V, 2.7 Ah
In case of a power supply failure an internal battery maintains the supply for up to 40 minutes.
Afterwards, or in case of discharged battery the Fluke 1760 is turned off and continues the measurements
with the latest settings as soon as the supply voltage returns. The battery can be replaced by the user.
8 Input Channels (4 Currents/4 Voltages or 8 Voltages)
Internal Flash Memory, 2 GB
PQ Analyze Software on CD-ROM
Ethernet Cable for Network Connection
Crosslink Ethernet Cable for Direct PC Connection
Fast Transient Analysis up to 10 MHz
4 x Voltage Probes, (600 V for INTL set, 1000 V for US set)
4 x Current Probes, (dual-range flexible current probes 1000 A / 200 A AC)
GPS Time Sync Receiver
Webinar: Introduction to Portable Precision Power Analyzers with Fluke
This wideband precision analyzer is accurate enough for the lab, yet it's built for the field. Offering you more freedom than ever before to make high accuracy power measurements wherever you need to. Whether in the lab or in the field. Designed for portability and eliminates the need to carry large, fragile, expensive analyzers into the field, allowing you to make measurements directly at the load in nearly any environment. By measuring directly at the load, you can discover how the equipment operates under real-world conditions, with real-world variables, not just at a test bench or in the lab.
During our 1-hour webinar, we've covered:
- The new Fluke Norma 6000 Power Analyzer for accurate measurements at frequencies from DC to 500kHz.
- It is not a Power Quality Analyzer.
- It is a Power Analyzer for accurate measurements at frequencies from DC to 500kHz.
- It is designed to be used in the field, its rugged, battery-operated, lightweight, and suited to use outside of a laboratory environment.
- You’ll learn why it can help you, where and how it is used.
Click on a category to view a selection of compatible accessories with the Fluke 1760 TR US Three-Phase Power Quality Recorder with Trans Topas.