1.800.561.8187

information@ITM.com

Customer Reviews
MyFlukeStore
 
 
Fluke 87V Industrial True-RMS Multimeter with temperature, 1000 V, 10 A-
Downloads: datasheet manual

Ask an Expert

Fluke 87V Industrial True-RMS Multimeter with temperature, 1000 V, 10 A

Model: 87V | Order No: 87-5

Identify complex signal problems fast with this industrial multimeter capable of capturing intermittents as quickly as 250 μS. In addition, this multimeter features a low-pass filter for accurate measurements on VFDs and shielding to block readings from high-frequency and high-energy noise.

Traceable Calibration Certificate for your 87-5 Industrial True-RMS Multimeter with temperature

$587.44 CAD

was $720.79

Availability:
39 in Stock


The Fluke 87V Industrial True-RMS Multimeter

The Fluke 87V has improved measurement functions, troubleshooting features, resolution and accuracy to solve more problems on motor drives, in plant automation, power distribution, and electromechanical equipment. The 87V operates very similar to the classic 87, but with more problem-solving power, safety, convenience and impact protection.
With its newly incorporated selectable low pass filter, the Fluke 87V allows troubleshooters to take accurate voltage, current and frequency measurements on the output side of the drive at either the drive itself or the motor terminals.

Features for maximum productivity:

  • Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment (87V)
  • Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument (87V)
  • Large digit display with bright, two-level backlight makes the 80 Series V significantly easier to read than older models

Electrical Safety:

All inputs are protected to Category III, 1000 V and Category IV 600 V. They can withstand impulses in excess of 8,000 V and reduce risks related to surges and spikes.

For a greater value see these Fluke 87V Kits and Bundles:

Fluke 87V Key Features:

  • True-rms ac voltage and current for accurate measurements on non linear signals
  • Selectable filter for accurate voltage and frequency measurements on motor drives
  • 0.05 % dc accuracy
  • 4-1/2 digit mode for precise measurements
  • Built-in thermometer lets you carry one less tool
  • Large display digits and two-level bright white backlight for increased visibility
  • 10,000 µF capacitance range for components and motor caps
  • Peak capture to record transients as fast as 250 µs
  • Measure up to 1000 V ac and dc
  • Measure up to 10 A, 20 A for up to 30 seconds
  • Auto and manual ranging for maximum flexibility
  • Analog bargraph
  • Resistance, continuity and diode test
  • Frequency to 200 kHz and % duty cycle
  • Min/Max and average recording to capture variations automatically
  • Relative mode to remove test lead resistance from low ohms measurements
  • Improved sleep mode for long battery life
  • Access door for fast battery changes without breaking the calibration seal
  • Limited lifetime warranty
  • Removable holster with built in test lead and probe storage
  • Cat IV 600 V and Cat III 1000 V electrical safety ratings
  • Basic test leads and alligator clips
  • Bead type thermocouple temperature probe

Correctly measure pulse-width modulated motor drive signals

Until now, there hasn't been a multimeter able to accurately measure adjustable speed drives. But the Fluke 87V is designed specifically to handle these complex signals. Think of the potential productivity you'll gain by taking the guesswork out of drive system troubleshooting. Measurements are correct each and every time.

  • Unique function for accurate measurements of noisy pulse-width modulated AC voltage.
  • Measures correctly at the ASD and at the motor terminals
  • Accurately measure the frequency (motor speed). Frequency measurement not affected by the ASDs carrier frequency
  • Measure AC current with an optional current clamp accessory
  • Compare reading from the 87V with the display on the ASD
  • Special shielding blocks high frequency, high-energy noise generated by large drive systems

Fluke 87V Specifications

Voltage DC:
Maximum voltage: 1000 V
Accuracy: ±(0.05% + 1)
Maximum resolution: 10μV

AC:
Maximum voltage: 1000 V
Accuracy: ±(0.7% + 2) True RMS
AC bandwidth: 20 kHz with low pass filter; 3 dB at 1 kHz
Maximum resolution: 0.1 mV
Current DC:
Maximum amps: 10 A (20 A for 30 seconds maximum)
Amps accuracy: ±(0.2% + 2)
Maximum resolution: 0.01μA

AC:
Maximum amps: 10 A (20 A for 30 seconds maximum)
Amps accuracy: ±(1.0% + 2) True RMS
Maximum resolution: 0.1μA
Resistance Maximum resistance: 50 MΩ
Accuracy: ±(0.2% + 1)
Maximum resolution: 0.1 Ω
Capacitance Maximum capacitance: 9,999μF
Accuracy: ±(1% + 2)
Maximum resolution: 0.01 nF
Frequency Maximum frequency: 200 kHz
Accuracy: ±(0.005% + 1)
Maximum resolution: 0.01 Hz
Duty Cycle Maximum duty cycle: 99.9%
Accuracy: ±(0.2% per kHz + 0.1%)
Maximum resolution: 0.1%
Range: Accuracy within ±(0.2% per kHz + 0.1%)
Temperature Measurement: -328.0 to 1994.0°F (-200.0 to 1090°C) excluding probe
Operating: 68 to 131°F (-20 to + 55°C)
Storage: -40 to 140°F (-40 to + 60°C)
80 BK Temperature Probe -40 to 500°F (-40 to 260°C), 35.96°F (2.2 °C) or 2% whichever is greater
Conductance Maximum conductance: 60.00 nS
Accuracy: ±(1.0% + 10)
Maximum resolution: 0.01 nS
Diode Range: 3 V
Resolution: 1 mV
Accuracy: ±(2% + 1)
Humidity (without condensation) 0 to 90% (32 to 95°F [0 to 35°C])
0 to 70% (95 to 131°F [35 to 55°C])
Operating Altitude 6561.68' (2000 m)
Overvoltage Category EN 61010-1 to 1000 V CAT III, 600V CAT IV
Agency Approvals CE, CSA, RCM
Display Digital: 6000 counts updates 4/seconds, 19,999 counts in high-resolution mode
Analog: 32 segments, updates 40/seconds
Frequency: 19,999 counts, updates 3/seonds at > 10 Hz
Shock 3.28' (1m) drop per IEC 61010-1:2001
Vibration Per MIL-PRF-28800 for a Class 2 instrument
Power Alkaline approximately 400 hours typical, without backlight
Dimensions 7.9 x 3.8 x 2" (201 x 98 x 52 mm) (with holster)
Weight 0.78 lbs (355 g)
1.37 lbs (624 g) - with holster
Click here for complete specifications on the Fluke 87V

What's included with the Fluke 87V

  • Industrial Multimeter
  • Test Leads
  • Alligator Clips
  • Temperature Probe
  • Holster
  • 9 V Battery (Installed)
  • Lifetime Warranty

Webinar: EVSE Safety Maintenance with Fluke


In recent years, more people are opting for greener solutions to minimize environmental damage, which has led to an increased demand for environmentally safe solutions such as electric vehicles. Naturally, this has led to an increase in the installation of EV charging stations, but also the risks for technicians. In 2020, there were 126 fatal and 2200 non-fatal electrical injuries. Many of these are caused when technicians are exposed to hazardous voltage and arc faults that could cause shock and fire hazards due to a lack of understanding of proper EVSE installation and maintenance. Considering that EVSEs have a high rate of failure, estimated at 30 to 50% (SAE), reliability is essential when building EV infrastructure and gaining user acceptance.

Fluke: How-To Check Power Quality With A Multimeter


This video will serve as a how-to on checking the power quality with a multimeter; specifically the 87V. One of the ways to check the power quality, is by using the peak Min/Max.

Fluke: How-To Test Fuses in A Multimeter


This video will serve as a how-to on testing fuses in multimeters; specifically the 87V & 233. Without having to open the case, you can change your setting to the Ohm function and jump from the Ohm jack to the Amp jack to measure across the fuse and see its continuity.

Fluke: How-To Measure Frequency and Duty Cycle With The 87V Industrial Multimeter


The 87V has many advanced measurements such as the frequency and duty cycle and this video shows you, the user, how simple it is to measure these with this instrument.

Fluke: What Is Peak MIN/MAX and How Do I Use It


If you have a multimeter, you need to know what peak Min/Max is. This video explains this feature using the 87V multimeter.

Fluke: How-To Configure A Multimeter To Use AC And AC/DC Current Clamps


This video will serve as a how-to on extending the life of your Fluke multimeter by using AC and AC/DC current capabilities. The step-by-step process shown here will have you configuring your instrument in no time at all!

Fluke: How-To Repair Fading Digits in the 87V Industrial TRMS Multimeter


If the digits are fading or not lighting up on your 87V, this video will serve as a how-to on fixing these issues.

Fluke: Secret Functions on the 87V Digital Multimeter

Accessories

Click on a category to view a selection of compatible accessories with the Fluke 87V Industrial True-RMS Multimeter with temperature, 1000 V, 10 A.

Fluke CXT80 CXT80
Rugged Pelican Hard Case for the Fluke 80/180 Series.
$319.47 CAD

was $391.99


Learn More
Fluke C101 Hard Carrying Case C101
Compatible with a vareity of Fluke industrial test tools. Additionally, this hard carrying case features a foam interior.
$133.49 CAD

was $163.79


Learn More
Fluke C37XT Protective EVA Hard Tool Case, 10.9 x 4.7" C37XT
Durable and high quality, this 10.9 x 4.7" (277 x 119 mm) tool case is designed to fit most multimeters and similarly sized tools. Made from 600D EVA foam, this case features hinged dividers, additional pockets, straps, space for many accessories, and secures your tools with adjustable straps.
$71.87 CAD

was $88.19


Learn More
Fluke C25 Large Soft Carrying Case for digital multimeters C25
Durable, zippered carrying case with padding and inside pocket, and high quality polyester exterior. It includes a convenient hand strap and carries most of Fluke's popular digital multimeters.
$65.03 CAD

was $79.79


Learn More
Fluke H80M Protective Holster with Magnetic Hanging Strap H80M
$88.99 CAD

was $109.19


Learn More
Fluke C550 Premium Tool Bag C550
Tool Bag with steel reinforced frame.
$164.30 CAD

was $201.59


Learn More
Fluke TB25 Tool Bucket Organizer Bag, 5.2 gal TB25
Durable and rugged, this tool bucket organizer bag has a 5.2-gallon capacity that can be relied on to protect and safely carry a variety of test tools and accessories. With its waterproof hard bottom shell, this versatile organizer has a total of 28 pockets that can fit hand tools, DMMs, clamp meters, test probes, and more.
$127.78 CAD

was $156.79


Learn More
Fluke TL935 Patch Cord Kit TL935
Kit of 60, 90, and 120cm cords. 30V RMS or 60V DC, and 15A.
$93.10 CAD

was $114.23


Learn More
Fluke TL932 Patch Cord Set 36" (90 cm) TL932
36" (90 cm) (30V rms or 60V DC, 15A).
$37.68 CAD

was $46.23


Learn More
Fluke TL930 Patch Cord Set (60 cm) TL930
30V RMS or 60V DC, and 15A.
$37.68 CAD

was $46.23


Learn More
Fluke TL910 Electronic Test Probe Set TL910
One pair (red, black) of leads with very small tips to access hard to reach electronic test points.
$110.83 CAD

was $135.99


Learn More
Fluke TL81A Deluxe Electronic Test Lead Set TL81A
Works with Digital Multimeters that accept safety shrouded, standard diameter, banana connectors. Includes a quad-fold nylon pouch.
$240.51 CAD

was $295.11


Learn More
Fluke TL76 Test Lead Set TL76
Pair of red, black silicone test leads with right angle shrouded 0.16" (4 mm) banana plugs.
$58.18 CAD

was $71.39


Learn More
Fluke TL75 Hard Point Test Lead Set TL75
Offers the convenience of a test lead and probe-in-one unit with a variety of connections. One pair (red, black) comfort grip probe with PVC insulated right angel shrouded 0.16" (4 mm) banana plugs.
$41.00 CAD

was $50.31


Learn More
Fluke TL71 Premium Right Angle Test Lead Set TL71
Comfort grip probes with flexible silicone-insulated, right-angle test leads. They are heat and cold resistant, with a safety rating of CAT II 1000 V, 10 A.
$48.76 CAD

was $59.83


Learn More
Fluke TL40 Retractable Tip Test Lead Set TL40
The set comes equipped with a pair (red, black) of flexible silicone insulated test leads with sharp needlepoint tips that are adjustable to the desired length from 0 to 3" (0 to 76 mm). The extra strength probe tips to provide a long service life and the test leads have a CAT III 300 V, 3 A rating, UL listed.
$76.47 CAD

was $93.83


Learn More
Fluke TL26A 5-Way Test Lead Set, 60" TL26A
Provides five different ways to connect to terminals, this test lead set features 60" (1.5 m), silicone-insulated leads, useable from -112 to 158°F (-80 to 70°C), and is rated for 30 V, 8 A.
$100.86 CAD

was $123.75


Learn More
Fluke TL224 SureGrip Silicone Insulated Test Leads TL224
Provides convenience and variety for test lead configurations by attaching clips, hooks, and grabbers as needed.
$48.76 CAD

was $59.83


Learn More
Fluke TL223 SureGrip Electrical Test Lead Set TL223
Designed for your comfort so you can focus on taking accurate measurements, this handy all-in-one kit comes equipped with a SureGrip alligator clip set, slim-reach test probes (flat bladed), and SureGrip silicone test lead set.
$121.92 CAD

was $149.59


Learn More
Fluke TL222 SureGrip Silicone Insulated Test Leads TL222
Test Leads designed to improve steadiness with rubber overmolded surfaces and finger-hugging curves.
$48.76 CAD

was $59.83


Learn More
Fluke TL221 SureGrip Test Lead Extension Set TL221
Features over molded surfaces and finger-hugging curves for a more comfortable and reliable grip, this test lead extension set is designed to improve steadiness in slippery hands.
$48.76 CAD

was $59.83


Learn More
Fluke TL220 Suregrip Industrial Test Lead Set TL220
Includes the Fluke AC220, Fluke TP220, and Fluke TL224.
$121.92 CAD

was $149.59


Learn More
Fluke TL940 Mini-Hook Test Lead Set TL940
30V RMS or 60V DC, and 15A.
$46.54 CAD

was $57.11


Learn More
Fluke TL950 Mini-Pincer Test Lead Set TL950
30V RMS or 60V DC, and 15A.
$73.15 CAD

was $89.75


Learn More
Fluke TL960 Micro-Hook Test Lead Set TL960
30V RMS or 60V DC, and 15A.
$55.41 CAD

was $67.99


Learn More
Fluke TP920 Test Probe Adapter Kit TP920
$65.39 CAD

was $80.23


Learn More
Fluke TP912 Replacement Tips for TL910 TP912
$53.20 CAD

was $65.27


Learn More
Fluke TP80 Electronic Test Probe Set TP80
$58.74 CAD

was $72.07


Learn More
Fluke TP4 Slim Reach Test Probe Set TP4
Features hard stainless steel probe tips, this slim reach test probes set is designed to fit securely into IEC electrical wall outlets.
$33.24 CAD

was $40.79


Learn More
Fluke TP220 SureGrip Industrial Test Probes TP220
For use with the TL222 and TL224. Additionally, these industrial test probes feature 0.5" (12 mm) stainless steel tips that provide reliable contact and flexible finger barrier, which improves grip.
$35.46 CAD

was $43.51


Learn More
Fluke TP2 Slim Reach Test Probe Set TP2
Ideal for probing closely spaced or recessed terminals, this slim reach test probe set also features hard stainless steel probe tips.
$33.24 CAD

was $40.79


Learn More
Fluke TP1 Slim Reach Test Probe Set TP1
Features hard stainless steel probe tips and one pair of slender probe bodies, which is ideal for probing closely spaced or recessed terminals. Additionally, it comes in a flat blade design to hold securely in blade type electrical wall sockets.
$33.24 CAD

was $40.79


Learn More
Fluke TLK-225 SureGrip Master Accessory Set TLK-225
Perfect replacement kit provides flexibility and comfort with all SureGrip™ leads and probes in a convenient six pocket, roll-up pouch.
$254.92 CAD

was $312.79


Learn More
Fluke TL970 Hook and Pincer Kit TL970
Kit includes TL940 Mini-Hook Test Lead Set, TL950 Mini-Pincer Test Lead Set, and TL960 Micro-Hook Test Lead Set.
$144.08 CAD

was $176.79


Learn More
Fluke AC89 Heavy Duty Insulation Piercing Test Clip AC89
Single probe pierces 0.01 to 0.6" (0.25 to 1.5 mm) insulated wire with a small pin allows self-healing of the insulation, and 1000 V, 10 A maximum.
$68.71 CAD

was $84.31


Learn More
Fluke AC87 Heavy Duty Bus Bar Clip Set AC87
Comes equipped with one pair (red, black) of flat, right angle design for connecting to bus bars, and CAT III 600 V, 5 A rating, CSA listed. Adjustable collar provides two ranges of jaw openings up to 1.81" (30 mm).
$69.82 CAD

was $85.67


Learn More
Fluke AC285 SureGrip Alligator Clips AC285
Designed to improve steadiness in slippery hands, and is for use with TL222 and TL224 test leads. Rubber over-molded surfaces and finger-hugging curves give a comfortable, reliable grip so you can focus on making an accurate measurement.
$49.87 CAD

was $61.19


Learn More
Fluke AC283A SureGrip Pincer Clips AC283A
Designed to improve steadiness in slippery hands, and is for use with TL222 and TL224 test leads. Rubber over-molded surfaces and finger-hugging curves give a comfortable, reliable grip so you can focus on making an accurate measurement.
$69.82 CAD

was $85.67


Learn More
Fluke AC280 SureGrip Hook Clips AC280
Designed to improve steadiness in slippery hands, and is for use with TL222 and TL224 test leads. Rubber over-molded surfaces and finger-hugging curves give a comfortable, reliable grip so you can focus on making an accurate measurement.
$59.85 CAD

was $73.43


Learn More
Fluke AC220 SureGrip Alligator Clips AC220
Designed to improve steadiness with rubber overmolded surfaces and finger-hugging curves. For use with TL222 and TL224 test leads.
$72.04 CAD

was $88.39


Learn More
Fluke 80K-15 High Voltage Probe 80K-15
Designed to extend the voltage measuring capability of an AC/DC voltmeter to 15,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.
$459.81 CAD

was $564.19


Learn More
Fluke L215 SureGrip Kit with probe light and probe extender L215
Ideal for high-energy environments. Additionally, this kit comes equipped with a probe extender and probe light, which allows users to illuminate those hard-to-reach areas.
$177.99 CAD

was $218.39


Learn More
Fluke L210 Probe Light Kit L210
Comes in a small and rugged design, this probe light kit liberates the users' hands for work. Additionally, it features a bright white LED and fits between the modular test probe and test lead.
$87.85 CAD

was $107.79


Learn More
Fluke 80PK-11 Type-K Velcro Thermocouple Temperature Probe 80PK-11
$84.43 CAD

was $103.59


Learn More
Fluke 80PK-8 Pipe Clamp Temperature Probe 80PK-8
Uses Type-K thermocouple for fast temperature and superheat measurements of pipe surfaces. Designed to reliably measure the temperature of pipes ¼" (6 mm) to 1⅜" (35 mm) in diameter, at temperatures between -20 and 300°F (-29 and 149°C), while retaining a long service life.
$290.95 CAD

was $356.99


Learn More
Fluke 80PK-27 SureGrip Industrial Surface Temperature Probe 80PK-27
Compatible with any temperature measuring instrument that accepts type K thermocouples features a miniature connector input and a cold reference junction compensation. Additionally, this industrial surface temperature probe is ideal for surfaces in rugged environments.
$520.29 CAD

was $638.39


Learn More
Fluke 80PK-26 SureGrip Tapered Temperature Probe 80PK-26
Features a tapered tip, making this tapered temperature probe ideal for use in air, non-caustic gas, and surface applications.
$204.23 CAD

was $250.59


Learn More
Fluke 80PK-25 SureGrip Piercing Temperature Probe 80PK-25
A K type thermocouple probe that is suitable for the food industry, liquids, and gel.
$204.23 CAD

was $250.59


Learn More
Fluke 80PK-24 SureGrip Air Temperature Probe 80PK-24
A K type thermocouple probe ideal for use in air and non-caustic gas measurements. Additionally, this air temperature probe features a bead protected by perforated baffle.
$204.23 CAD

was $250.59


Learn More
Fluke TPAK ToolPak Magnetic Meter Hanger ToolPak
Hang your meter in a variety of ways for convenient hands-free operation. Attaches to most Fluke meters.
$60.95 CAD

was $74.79


Learn More
Fluke TLK-220 US SureGrip Industrial Test Lead Kit TLK-220
A handy all-in-one kit that is ideal for industrial applications. Additionally, this test lead kit comes equipped with AC220 SureGrip alligator clip set, AC285 SureGrip large jaw alligator clip set, TP220 sharp test probes, TL224 SureGrip silicone right to straight test leads, and a carrying case.
$242.73 CAD

was $297.83


Learn More
Fluke 85RF High-Frequency Probe, 500 Mhz 85RF-II
A high-frequency probe designed to convert a DC voltmeter with an input impedance of 10 MΩ into a high frequency (100 kHz to 500 Mhz) RF voltmeter. Additionally, it's probe's DC output is calibrated to equal the RMS value of sine wave input.
$442.70 CAD

was $543.19


Learn More
Fluke 80AK-A Thermocouple Adapter 80AK-A
Designed to adapt K type thermocouples mini-connector to dual shrouded banana plug inputs. Additionally, it is ideal for low voltage applications below 30 V AC and 60 V DC.
$59.32 CAD

was $72.79


Learn More
Fluke BP980 Double Banana Plug Kit BP980
$69.82 CAD

was $85.67


Learn More
Fluke L200 Probe Light L200
Easily attaches to any Fluke test probe.
$47.91 CAD

was $58.79


Learn More
Fluke i410-KIT AC/DC Current Clamp with Carrry Case I410-KIT
Included with kit: Fluke i410 (1-400A AC RMS, 1-400A DC Current Clamp) and a Zippered vinyl carry case with moveable divider.
$472.37 CAD

was $579.59


Learn More
Fluke i410 AC/DC Current Clamp I410
The current clamp expands the functionality of digital multimeters and measures up to 400 amps for both AC and DC currents. The large clamp claw gives you access to difficult to reach areas.
$399.34 CAD

was $489.99


Learn More
Fluke i2000 FLEX Flexible AC Current Clamp I2000-FLEX
Utilizing the Rogowski principle, the clamp can be used to measure currents up to 2000 A when used in conjunction with multimeters, recorders, or data loggers. The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas.
$677.75 CAD

was $831.59


Learn More
Fluke i1010-KIT Current Clamp Kit I1010-KIT
Includes carrying case.
$677.75 CAD

was $831.59


Learn More
Fluke i1010 AC/DC Current Clamp I1010
Highly reliable, measures 1 to 1000 A, and provides accurate current reading without breaking the circuit. This clamp measures both AC and DC with a large jaw, battery-powered Hall-effect probe that gives access to difficult to reach areas.
$646.94 CAD

was $793.79


Learn More
Fluke H900 Test Lead Holder H900
$46.54 CAD

was $57.11


Learn More

Ask a question about the Fluke 87V Industrial True-RMS Multimeter with temperature, 1000 V, 10 A :

Customer Reviews for the Fluke 87V