Model: BC190/830
Universal, mains power adapter for use with Fluke 190 Series ScopeMeter Test Tool.
The adapter is intended for operating and charging the Fluke 190-Series ScopeMeter Test Tool. The adapter is based on the switched mode concept for high efficiency, low stand-by power consumption, and complies with level-VI requirements.
Applications
| Input | |
| Nominal Input Voltage | 100 to 240 Vac, ±10% |
| Input Current | 0.35 A at maximum load |
| Nominal Input Frequency | 50/60 Hz, ±10% |
| Mains Inlet | IEC 60320-1 Type C8 |
| Input Power, No Load | <0.1 W (@ 115/230 Vac) |
| Output | |
| Output Voltage | 18 Vdc, ±5% |
| Output Current | 0 to 840 mA |
| Output Cable Length | 2 m (6.5') |
| Output Connector | .5 mm outer diameter, per DIN45232 |
| Output Polarity | Inner contact negative, outer contact positive |
| Environmental | |
| Operating Temperature | 0 to 50°C (32 to 122°F) Up to 90% relative humidity, no condensation |
| Storage Temperature | 40 to 70°C 10 to 95% relative humidity |
| Maximum Altitude | 2000 m (6562') above sea-level |
| General Specifications | |
| Dimensions | 79 x 149 x 49 mm |
| Housing Material | Heat Resistant ABS |
| Ingress Protection | IEC 60529, IP40 |
| Weight | 0.35 kg |
Click on a category to view a selection of compatible accessories with the Fluke BC190/830 Power Adapter, Universal, 190 Series.