Model: 1000FLT
Perform five essential lighting tests in under 30 seconds to pinpoint problems and verify operation when done. Survives on-the-job handling, and is drop-tested to survive from a 6' (2 m) ladder.
Discontinued!
This product has been discontinued and is no longer available.
There is no direct replacement, however we recommend the:
The replacement product is only available on our affiliate ITM.com website. Don't worry your cart and information will be brought over.
The replacement product is only available on our affiliate ITM.com website. Don't worry your cart and information will be brought over.
Not what you're looking for? Let’s do a search and help you find what you need.
The most complete light tester, incorporating all tests and functions needed to find rood cause.
With the 1000FLT you'll be able to test whether a bulb is functioning, determine if ballast is working, check for voltage presence, test filament continuity, and determine if ballast is magnetic or electronic. All of these features will enable you to save time and reduce costs by using only one tester to perform all essential lighting tests in less than 30 seconds.
Rugged design means that the 1000FLT meets Fluke durability standards. The unit itself has been drop tested to survive a fall from six feet (2m), while the extendable rod is all metal and very rugged. However, should the need arise the metal rod can be easily replaced. Finally, Fluke backs the 1000FLT with a three year warranty.
| Lamp Test Max Output | 3000 V peak-peak |
| Ballast Test | 20 kHz |
| Ballast Type Discriminator | ≤10' (3 m) distance |
| Pin Continuity Test | <1 kΩ |
| NCV (VoltAlert™) | 85 to 400 V AC 45 to 67 Hz ≤4" (10 cm) distance |
| Temperature | Operating: 14 to 122°F (-10 to 50°C) Storage: -40 to 140°F (-40 to 60°C) |
| Relative Humidity | 85% maximum |
| Safety Rating | IEC 61010-1, pollution degree 2 |
| Battery | Type: 4 x AA alkaline IEC LR6 Life: 40 hours |
| Auto Power Off | 20 minutes after non-use |
| Low Battery Indicator | Power button light blinks when power is low (typically 85% of capacity depleted) |
| Operating Altitude | <2000 m |
| Electromagnetic Environment | EN 61326-1: Portable |
| Electromagnetic Compatibility | CE IEC: CISPR 11: Group 2, class A |
| Resistance to Impact | 6' (2 m) drop |
| Dimensions | 8.5 x 1.2 x 2.6" (21.5 x 3.0 x 6.5 cm) |
| Weight | 0.80 lb (0.37 kg) |
Click on a category to view a selection of compatible accessories with the Fluke 1000FLT Fluorescent Light Tester.
We accept these payment methods:
We also accept wire transfers/EFT, cheques and purchase orders on approved credit. Accepted payment methods vary by country.
