Model: 5615-12-B
This Inconel-sheathed secondary reference temperature standard features a durable design thanks to its fully supported sensing element, which is surrounded in a ceramic case with a moisture- and contaminant-resistant hermetic glass seal. The temperature standard is ideal for use in the factory, field or lab and features bare wire connections with a -200 to 420°C range.
This secondary reference temperature standard has a reference-grade platinum sensing element.
Features
| Temperature Range | -328 to 788°F (-200 to 420°C) |
| Nominal Resistance At 0°C | 100Ω ±0.10Ω |
| Temperature Coefficient | 0.0039250Ω/Ω/°C |
| Accuracy | ±0.024°C at -200°C; ±0.012°C at 0°C; ±0.035°C at 420°C |
| Short-Term Repeatability | ±0.009°C at 0.010°C |
| Drift | ±0.007°C at 0.010°C |
| Sensor Length | 1.1in (28mm) |
| Sensor Location | 0.27in ±0.13in (6.9mm ±3.3mm) from tip |
| Sheath Dimensions | 12in x 0.250in (305mm x 6.35mm) |
| Sheath Diameter Tolerance | ±0.005in (±0.127mm) |
| Sheath Material | Inconel 600 |
| Minimum Insulation Resistance | 1000MΩ at 23°C |
| Transition Junction Temperature Range | -58 to 392°F (-50 to 200°C) |
| Transition Junction Dimensions | 2.8in x 0.5in (71mm x 13mm) |
| Maximum Immersion Length | 10in (254mm) |
| Response Time | 9 seconds typical |
| Self Heating (In 0°C Bath) | 50mW/°C |
| Lead-Wire Cable Type | PTFE insulated with PTFE jacket, 22AWG |
| Lead-Wire Length | 6ft (183cm) |
| Lead-Wire Temperature Range | -58 to 392°F (-50 to 200°C) |
Click on a category to view a selection of compatible accessories with the Fluke 5615-12-B Secondary Reference Temperature Standard with Bare Wire, -200 to 420°C.
We accept these payment methods:
We also accept wire transfers/EFT, cheques and purchase orders on approved credit. Accepted payment methods vary by country.
