Model: 753
Equipped with a USB interface and communication cable, this process calibrator can source, simulate, and measure pressure, temperature, and electrical signals. Users can download procedures, lists, and instructions created with software, and even upload data for printing, archiving, and analysis.
The Fluke 753 is everything you needed and wished for in the 743B and more!
The 753 does the work of several tools - sourcing, simulating and measuring pressure, temperature, and electrical signals in one rugged, hand-held device. You'll fall in love with the new improved graphical screen, Li-on battery for longer life, USB port and new accessories to complete the package.
For documentation, the 753 automates calibration procedures and captures your data.
And, of course, it helps you meet rigorous standards like ISO 9000, FDA, EPA and OSHA regulations.
The 753 is a power multifunction documenting calibrator that lets you download procedures, lists, and instructions created with software-or upload data for printing, archiving, and analysis.
| Measurement Accuracy | |
| Voltage DC | Range/resolution: 100 mV, 3 V, 30 V, 300 V 1 year: 0.02% + 0.005 mV, 0.02% + 0.00005 V, 0.02% + 0.0005 V, 0.05% + 0.05 V 2 years: 0.03% + 0.005 mV, 0.03% + 0.00005 V, 0.03% + 0.0005 V, 0.07% + 0.05 V |
| Voltage AC | Range/resolution: 3 (40 to 500 Hz)/0.001 V, 30 (40 to 500 Hz)/0.01 V, 300 (40 to 500 Hz)/0.1 V 1 year: 0.5% + 0.002 V, 0.5% + 0.02 V, 0.5% + 0.2 V 2 years: 1.0% + 0.004 V, 1.0% + 0.04 V, 1.0% + 0.2 V |
| Current DC | Range/resolution: 30 mA, 110 mA 1 year: 0.01% + 5 µA, 0.01% + 20 µA 2 years: 0.015% + 7 µA, 0.015% + 30 µA |
| Resistance | Range/resolution: 10 Ω, 100 Ω, 1 kΩ, 10 kΩ 1 year: 0.05% + 50 mΩ, 0.05% + 50 mΩ, 0.05% + 500 mΩ, 0.1% + 10 Ω 2 years: 0.07% + 70 mΩ, 0.07% + 70 mΩ, 0.07% + 0.5 Ω, 0.15% + 15 Ω |
| Frequency | Range/resolution: 1.00 to 110.00 Hz/0.01 Hz, 110.1 to 1100.0 Hz/0.1 Hz, 1.101 to 11.000 kHz/0.001 kHz, 11.01 to 50.00 kHz/0.01 kHz 2 years: 0.05 Hz, 0.5 Hz, 0.005 kHz, 0.05 kHz |
| Source Accuracy | |
| Voltage DC | Range/resolution: 100 mV, 1 V, 15 V 1 year: 0.01% + 0.005 mV, 0.01% + 0.00005 V, 0.01% + 0.0005 V 2 years: 0.015% + 0.005 mV, 0.015% + 0.0005 V, 0.015% + 0.0005 V |
| Current DC | Range/resolution: 22 mA (source), current sink (simulate) 1 year: 0.01% + 0.003 mA, 0.02% + 0.007 mA 2 years: 0.02% + 0.003 mA, 0.04% + 0.007 mA |
| Resistance | Range/resolution: 10 Ω, 100 Ω, 1 kΩ, 10 kΩ 1 year: 0.01% + 10 mΩ, 0.01% + 20 mΩ, 0.02% + 0.2 Ω, 0.02% + 3 Ω 2 years: 0.015% + 15 mΩ, 0.015% + 30 mΩ, 0.03% + 0.3 Ω, 0.03% + 5 Ω |
| Frequency | Range/resolution: 0.1 to 10.99 Hz, 0.01 to 10.99 Hz, 11.00 to 109.99 Hz, 110.0 to 1099.9 Hz, 1.100 to 21.999 kHz, 22.000 to 50.000 kHz 2 years: 0.01 Hz, 0.01 Hz, 0.1 Hz, 0.1 Hz, 0.002 kHz, 0.005 kHz |
| Technical Data | |
| Data Log Functions | Measure functions: Voltage, current, resistance, frequency, temperature, pressure Reading rate: 1, 2, 5, 10, 20, 30, or 60 readings/minute Maximum record length: 8000 readings (7980 for 30 or 60 readings/minute) |
| Ramp Functions | Source functions: Voltage, current, resistance, frequency, temperature Rate: 4 steps/second Trip detect: Continuity or voltage (continuity detection not available when sourcing current) |
| Loop Power Function | Voltage: Selectable, 26 V Accuracy: 10%, 18 V minimum at 22 mA Maximum current: 25 mA, short circuit protected Maximum input voltage: 50 V DC |
| Step Functions | Source functions: Voltage, current, resistance, frequency, temperature Manual step: Selectable step, change with arrow buttons Autostep: Fully programmable for function, start delay, step value, time per step, repeat |
| Environmental Specifications | |
| Operating Temperature | 14 to 122°F (-10 to 50°C) |
| Storage Temperature | -4 to 140°F (-20 to 60°C) |
| Dust/Water Resistance | Meets IP52, IEC 529 |
| Operating Altitude | 9842' (3000 m) above mean sea level |
| Mechanical and General Specifications | |
| Batteries | Internal battery pack Li-ion: 7.2 V, 4400 mAh, 30 Wh |
| Battery Life | >8 hours typical |
| Battery Replacement | Via snap-shut door without opening calibrator; no tools required |
| Side Port Connections | Pressure module connector USB Connector to interface to your PC Connection for optional battery charger/eliminator |
| Data Storage Capacity | 1 week of calibration procedures results |
| 90 Day Specifications | The standard specification interval are 1 and 2 years Typical 90 day measurement and source accuracy can be estimated by dividing the one year "% of reading" or "% of output" specifications by 2. Floor specifications, expressed as "% of full scale" or "counts" or "ohms" remain constant. |
| Dimensions | 5.4 x 9.6 x 2.5" (136 x 245 x 63 mm) |
| Weight | 2.7 lbs (1.2 kg) |
| Safety Specifications | |
| Agency Approvals | CAN/CSA C22.2 No 1010.1-92, ASNI/ISA S82.01-1994, UL3111, and EN610-1:1993 |
Click on a category to view a selection of compatible accessories with the Fluke 753 Documenting Process Calibrator.
We accept these payment methods:
We also accept wire transfers/EFT, cheques and purchase orders on approved credit. Accepted payment methods vary by country.
