1.800.561.8187

information@ITM.com

Customer Reviews
MyFlukeStore
 
 
Fluke 179 True RMS Digital Multimeter with VoltAlert non-contact voltage tester kit-
Downloads: datasheet manual

Ask an Expert

Fluke 179 True RMS Digital Multimeter with VoltAlert non-contact voltage tester kit

Model: 179/EFSP-KIT7

Ideal for troubleshooting and repairing electrical and electronic systems due to this True RMS multimeter's backlit digital display, analog bar graph, and built-in temperature measurements. Additionally, this kit comes supplied with the 1AC-II VoltAlert non-contact voltage tester ideal for testing energized circuits.

Traceable Calibration Certificate for your 179/EFSP

$1,139.53 CAD

Availability:
5 in Stock


Fluke 179/EFSP-KIT7 Offers

Versatile meter for maintenance, field service and bench repair.

The Fluke 179 True-rms digital multimeter has the features needed to find most electrical and HVAC problems. Simple to use with significant improvements like True-rms, frequency, capacitance, temperature and min-max record.

The Fluke 179 has more measurement functions, conformance to the latest safety standards, and a much larger display that's easier to view.

Check the features and specifications using the tabs above.

This Electrician's Combo Kit has everything you need to get started:
  • Fluke 179 - True-rms Digital Multimeter
  • Fluke 1AC-II - VoltAlert Non-Contact Voltage Tester
  • Fluke 80BK - K-type temperature probe
  • Fluke AC220 - Retractable long reach alligator clips
  • Fluke TP220 - Sharp 12mm stainless steel tip provides reliable contact
  • Fluke TL224 - 1.5m silicone leads resist heat
  • Fluke TPAK - ToolPak meter hanging accessory to hold meter to steel surfaces
  • NEW! Fluke C35 - Lightweight soft case to provide optimal protection and storage

Electrical safety
All inputs are protected to measurement CAT III 1000 V and CAT IV 600V. This meter can withstand transient impulses in excess of 8000 V to help protect you from arc blasts resulting from surges and spikes.
Available as:
Fluke 179/EDA2 - Electronics Multimeter and Deluxe Accessory Combo Kit or
Fluke 179/61 - Industrial Multimeter and Infrared Thermometer Combo Kit or
Fluke 179/TPAK - Digital Multimeter & ToolPak Combo Kit
Also available with no temperature as Fluke 177 or as Fluke 175
Availability :
We currently have a large inventory of Fluke 179s in stock and ready to ship. Place your order online or call us toll free on 1-877-766-5412 (North America) or 403-256-3636.

Fluke 179/EFSP-KIT7 Specifications

Voltage DC
Accuracy ±(0.09% + 2)
Maximum Resolution 0.1 mV
Maximum 1000 V
Voltage AC
Accuracy ±(1.0% + 3)
Maximum Resolution 0.1 mV
Maximum 1000 V
Current DC
Accuracy ±(1.0% + 3)
Maximum Resolution 0.01 mA
Maximum 10 A
Current AC
Accuracy ±(1.5% + 3)
Maximum Resolution 0.01 mA
Maximum 10 A
Resistance
Accuracy ±(0.9% + 1)
Maximum Resolution 0.1 Ω
Maximum 50 MΩ
Capacitance
Accuracy ±(1.2% + 2)
Maximum Resolution 1 nF
Maximum 10,000 µF
Frequency
Accuracy ±(0.1% + 1)
Maximum Resolution 0.01 Hz
Maximum 100 kHz
Temperature
Accuracy ±(1.0% + 10)
Maximum Resolution 0.1°F (0.1°C)
Range -40 to 752°F (-40 to 400°C)
Environmental Specifications
Operating Temperature 14 to 122°F (-10 to 50°C)
Storage Temperature -22 to 140°F (-30 to 60°C)
Humidity (without condensation) 0 to 90% (32 to 95°F) (0 to 35°C)
0 to 70% (95 to 122°F) (35 to 50°C)
Safety Specifications
Overvoltage Category EN 61010-1 to 1000 V CAT III
EN 61010-1 to 600 V CAT IV
Agency Approvals UL, CSA, TÜV listed and VDE Pending
Mechanical and General Specifications
Battery Life Alkaline approximately 200 hours typical, without backlight
Size 1.7 x 3.5 x 7.3" (43 x 90 x 185 mm)
Weight 0.9 lb (420 g)
Click here for complete specifications on the Fluke 179/EFSP-KIT7

What's included with the 179/EFSP-KIT7 Electrician's Combo Kit

  • 179 True RMS Digital Multimeter
  • 1AC-II VoltAlert Non-Contact Voltage Tester
  • 80BK K-Type Temperature Probe
  • AC220 Alligator Clips
  • TP220 Sharp 0.5" (12 mm) Stainless Steel Tip
  • TL224 4.9' (1.5 m) Silicone Leads
  • TPAK ToolPak Meter Hanger
  • C35 Lightweight Soft Case
  • 9 V Battery (Installed)
  • Users Manual

Accessories

Click on a category to view a selection of compatible accessories with the Fluke 179 True RMS Digital Multimeter with VoltAlert non-contact voltage tester kit.

Fluke CXT170 CXT170
Rugged Pelican Hard Case for the Fluke 170 Series.
$326.32 CAD

was $400.39


Learn More
Fluke C1600 Meter and Accessories Gear Box C1600
$144.90 CAD

was $177.79


Learn More
Fluke C101 Hard Carrying Case C101
Compatible with a vareity of Fluke industrial test tools. Additionally, this hard carrying case features a foam interior.
$136.91 CAD

was $167.99


Learn More
Fluke C550 Premium Tool Bag C550
Tool Bag with steel reinforced frame.
$167.72 CAD

was $205.79


Learn More
Fluke C50 Meter Case C50
Case includes an inside pocket, belt loop and inside meter strap.
$74.16 CAD

was $90.99


Learn More
Fluke C25 Large Soft Carrying Case for digital multimeters C25
Durable, zippered carrying case with padding and inside pocket, and high quality polyester exterior. It includes a convenient hand strap and carries most of Fluke's popular digital multimeters.
$67.31 CAD

was $82.59


Learn More
Fluke C125 Soft Meter Case for Fluke Multimeters C125
Soft zippered carrying case with detachable external pouch. To be used with the 120-series, multimeters and testers.
$77.58 CAD

was $95.19


Learn More
Fluke TB25 Tool Bucket Organizer Bag, 5.2 gal TB25
Durable and rugged, this tool bucket organizer bag has a 5.2-gallon capacity that can be relied on to protect and safely carry a variety of test tools and accessories. With its waterproof hard bottom shell, this versatile organizer has a total of 28 pockets that can fit hand tools, DMMs, clamp meters, test probes, and more.
$131.21 CAD

was $160.99


Learn More
Fluke TL238 SureGrip Test Lead Set for High Energy Environments TL238
Designed for high energy environments, this kit comes equipped with the TP238, TP280, and TL224.
$140.33 CAD

was $172.19


Learn More
Fluke TL222 SureGrip Silicone Insulated Test Leads TL222
Test Leads designed to improve steadiness with rubber overmolded surfaces and finger-hugging curves.
$53.62 CAD

was $65.79


Learn More
Fluke TL221 SureGrip Test Lead Extension Set TL221
Features over molded surfaces and finger-hugging curves for a more comfortable and reliable grip, this test lead extension set is designed to improve steadiness in slippery hands.
$53.62 CAD

was $65.79


Learn More
Fluke TL220 Suregrip Industrial Test Lead Set TL220
Includes the Fluke AC220, Fluke TP220, and Fluke TL224.
$134.63 CAD

was $165.19


Learn More
Fluke L210 Probe Light Kit L210
Comes in a small and rugged design, this probe light kit liberates the users' hands for work. Additionally, it features a bright white LED and fits between the modular test probe and test lead.
$90.13 CAD

was $110.59


Learn More
Fluke TL71 Premium Right Angle Test Lead Set TL71
Comfort grip probes with flexible silicone-insulated, right-angle test leads. They are heat and cold resistant, with a safety rating of CAT II 1000 V, 10 A.
$52.48 CAD

was $64.39


Learn More
Fluke TL76 Test Lead Set TL76
Pair of red, black silicone test leads with right angle shrouded 0.16" (4 mm) banana plugs.
$65.03 CAD

was $79.79


Learn More
Fluke TLK291 Fused Test Probe Set TLK291
Compatible with a variety of Fluke multimeters and test leads, this fused test probe set provides firm and secure contact.
$160.87 CAD

was $197.39


Learn More
Fluke TL81A Deluxe Electronic Test Lead Set TL81A
Works with Digital Multimeters that accept safety shrouded, standard diameter, banana connectors. Includes a quad-fold nylon pouch.
$263.56 CAD

was $323.39


Learn More
Fluke TL80A Basic Electronic Test Lead Set TL80A
1 meter long silicone test lead set, alligator clip and probe tip extender in a soft carrying case.
$142.62 CAD

was $174.99


Learn More
Fluke 80K-6 KV High Voltage Probe 80K-6
Designed to extend the voltage measuring capability of an AC/DC voltmeter to 6000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.
$271.55 CAD

was $333.19


Learn More
Fluke 80K-40 High Voltage Probe 80K-40
Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.
$424.44 CAD

was $520.79


Learn More
Fluke 80K-15 High Voltage Probe 80K-15
Designed to extend the voltage measuring capability of an AC/DC voltmeter to 15,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.
$470.08 CAD

was $576.79


Learn More
Fluke AC220 SureGrip Alligator Clips AC220
Designed to improve steadiness with rubber overmolded surfaces and finger-hugging curves. For use with TL222 and TL224 test leads.
$79.86 CAD

was $97.99


Learn More
Fluke TL223 SureGrip Electrical Test Lead Set TL223
Designed for your comfort so you can focus on taking accurate measurements, this handy all-in-one kit comes equipped with a SureGrip alligator clip set, slim-reach test probes (flat bladed), and SureGrip silicone test lead set.
$134.63 CAD

was $165.19


Learn More
Fluke L206 Deluxe LED Hat Light L206
Three super bright white LEDs never burn out attach to hard hat, baseball cap, or panel door.
$87.85 CAD

was $107.79


Learn More
Fluke i410 AC/DC Current Clamp I410
The current clamp expands the functionality of digital multimeters and measures up to 400 amps for both AC and DC currents. The large clamp claw gives you access to difficult to reach areas.
$407.33 CAD

was $499.79


Learn More
Fluke i400S AC Current Clamp I400S
For use with digital multimeters, power quality analyzers, and portable oscilloscopes, this current clamp allows users to take accurate current measurements without breaking electric circuits. Additionally, it measures up to 400 A AC.
$450.69 CAD

was $552.99


Learn More
Fluke i2000 FLEX Flexible AC Current Clamp I2000-FLEX
Utilizing the Rogowski principle, the clamp can be used to measure currents up to 2000 A when used in conjunction with multimeters, recorders, or data loggers. The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas.
$691.44 CAD

was $848.39


Learn More
Fluke i1010 AC/DC Current Clamp I1010
Highly reliable, measures 1 to 1000 A, and provides accurate current reading without breaking the circuit. This clamp measures both AC and DC with a large jaw, battery-powered Hall-effect probe that gives access to difficult to reach areas.
$660.63 CAD

was $810.59


Learn More
Fluke i1000s AC Current Probe I1000S
Designed to expand oscilloscope applications in industrial and power environments. Ideal for measuring distorted current waveforms and harmonics.
$1,135.39 CAD

Learn More
Fluke i400 AC Current Clamp, 400 A AC, CAT IV 600 V/CAT III 1000 V I400
Compatible with digital multimeters, this current clamp measures up to 400 A AC and features a 1 mA/A output that guarantees easy reading on your meter. In addition, this clamp provides precise current measurements without breaking electric circuits, helping you measure safely with industry-standard safety ratings.
$248.73 CAD

was $305.19


Learn More
Fluke i3000s AC Current Clamp I3000S
3000A AC current clamp with BNC terminated lead
$1,164.79 CAD

Learn More
Fluke i200s AC Current Clamp I200S
A dual-range of 20 A and 200 A ac current clamp with voltage output via a safety insulated BNC connector. A dual banana to BNC adapter is supplied to allow the clamp to be connected to multimeters with banana inputs.
$394.78 CAD

was $484.39


Learn More
Fluke i3000s Flex-36 AC Current Clamp, 36 inch length I3000S-FLEX-36
36" length, 3000A max, switchable current range for 30A, 300A or 3000A using a 1mA/A, 10mV/A or 100mV/A output and BNC connector.
$1,324.39 CAD

Learn More
Fluke i3000s Flex-24 Flexible AC Current Probe, 24 inch length I3000S-FLEX-24
Flexible 24" 3000A AC current probe with BNC terminated lead.
$1,164.79 CAD

Learn More
Fluke TPAK ToolPak Magnetic Meter Hanger ToolPak
Hang your meter in a variety of ways for convenient hands-free operation. Attaches to most Fluke meters.
$67.31 CAD

was $82.59


Learn More
Fluke TP2 Slim Reach Test Probe Set TP2
Ideal for probing closely spaced or recessed terminals, this slim reach test probe set also features hard stainless steel probe tips.
$37.64 CAD

was $46.19


Learn More
Fluke TLK-225 SureGrip Master Accessory Set TLK-225
Perfect replacement kit provides flexibility and comfort with all SureGrip™ leads and probes in a convenient six pocket, roll-up pouch.
$279.54 CAD

was $342.99


Learn More
Fluke PM9081 Dual Banana Plug (Male) to Female BNC Adapter PM9081/001
$83.28 CAD

was $102.19


Learn More
Fluke 80PK-27 SureGrip Industrial Surface Temperature Probe 80PK-27
Compatible with any temperature measuring instrument that accepts type K thermocouples features a miniature connector input and a cold reference junction compensation. Additionally, this industrial surface temperature probe is ideal for surfaces in rugged environments.
$531.70 CAD

was $652.39


Learn More
Fluke 80PK-26 SureGrip Tapered Temperature Probe 80PK-26
Features a tapered tip, making this tapered temperature probe ideal for use in air, non-caustic gas, and surface applications.
$208.79 CAD

was $256.19


Learn More
Fluke 80PK-25 SureGrip Piercing Temperature Probe 80PK-25
A K type thermocouple probe that is suitable for the food industry, liquids, and gel.
$208.79 CAD

was $256.19


Learn More
Fluke 80PK-24 SureGrip Air Temperature Probe 80PK-24
A K type thermocouple probe ideal for use in air and non-caustic gas measurements. Additionally, this air temperature probe features a bead protected by perforated baffle.
$208.79 CAD

was $256.19


Learn More
Fluke 80PK-22 SureGrip Immersion Temperature Probe 80PK-22
Compatible with any temperature measuring instrument that accepts K type thermocouples and features a miniature connector input. Additionally, this immersion temperature probe is for use in liquid and gels, and can also be used as a general-purpose probe.
$176.85 CAD

was $216.99


Learn More
Fluke 80PK-1 Bead Probe 80PK-1
A K type thermocouple ideal for general purpose applications.
$79.86 CAD

was $97.99


Learn More
Fluke 80CK-M type K Male Mini-Connectors 80CK-M
Yellow connectors with isothermal screw terminal. Pack of 2.
$54.76 CAD

was $67.19


Learn More
Fluke 80BK-A Integrated DMM Temperature Probe 80BK-A
A K type thermocouple with a standard shrouded banana jack that is compatible with digital multimeters that feature temperature measurement functions. Additionally, this integrated digital multimeter temperature probe comes in a convenient one-piece construction.
$84.43 CAD

was $103.59


Learn More
Fluke 80PK-3A Surface Temperature Probe 80PK-3A
Compatible with any temperature measuring instrument that accepts type K thermocouples and features a miniature connector input. Additionally, this surface temperature probe is ideal for measuring the temperature of flat or slightly convex surfaces, with an exposed junction to allow direct contact with the surface being measured.
$271.55 CAD

was $333.19


Learn More
Fluke 80PK-8 Pipe Clamp Temperature Probe 80PK-8
Uses Type-K thermocouple for fast temperature and superheat measurements of pipe surfaces. Designed to reliably measure the temperature of pipes ¼" (6 mm) to 1⅜" (35 mm) in diameter, at temperatures between -20 and 300°F (-29 and 149°C), while retaining a long service life.
$297.79 CAD

was $365.39


Learn More
Fluke 80T-150U Universal Temperature Probe 80T-150UA
A self-contained temperature-to-voltage converter, this probe is designed to provide a direct temperature reading when it is connected to any high impedance DMM capable of 1 mV resolution, and at least a 300-count full-scale readout capability.
$470.08 CAD

was $576.79


Learn More
Fluke 80PK-EXT Extension Wire Kit 80PK-EXT
Extension kit for type K thermocouple wires. Includes 3m of thermocouple wire and a pair of male/female mini-connectors.
$116.37 CAD

was $142.79


Learn More
Fluke 80PK-9 General Purpose Probe 80PK-9
Featuring a general purpose type-K thermocouple probe for surface, air and non-caustic gases. It has a measuring range of -40 to 260°C.
$131.21 CAD

was $160.99


Learn More
Fluke 80AK-A Thermocouple Adapter 80AK-A
Designed to adapt K type thermocouples mini-connector to dual shrouded banana plug inputs. Additionally, it is ideal for low voltage applications below 30 V AC and 60 V DC.
$61.61 CAD

was $75.59


Learn More
Fluke 80TK Thermocouple Module 80TK
Thermocouple converter that accepts the output of any K-type thermocouple and converts it to 1 mV per degree (Celsius or Fahrenheit).
$260.14 CAD

was $319.19


Learn More

Ask a question about the Fluke 179 True RMS Digital Multimeter with VoltAlert non-contact voltage tester kit :

Customer Reviews for the Fluke 179/EFSP-KIT7