Adapters

Fluke ZERO ADAPTER Zero Adapter
Model: ZERO ADAPTER

Standard accessory for Fluke 165XB Electrical Installation Tester.

Fluke TPS-SHUNT-20MA Shunt, 20 mA
Model: TPS-SHUNT-20MA

Thin, flexible probes for use with the 1760 series Energy Logger and Recorders.

Fluke TPS SHUNT 1A Shunt, 1A AC/DC, A680501054
Model: TPS SHUNT 1A

For use with Fluke Analyzers.

Fluke TL970 Hook and Pincer Kit
Model: TL970

Kit includes TL940 Mini-Hook Test Lead Set, TL950 Mini-Pincer Test Lead Set, and TL960 Micro-Hook Test Lead Set.

Fluke TL82 Automotive Pin & Socket Adapter Set
Model: TL82

A must-have for work on Asian or European vehicles.

Fluke SVS-500 Shaft Voltage Set and Magnetic Base for the MDA-500 Series
Model: SVS-500

For use with MDA-500 Motor Drive Analyzer models.

Fluke SPVML-2M Solmetric PV Module Ladder-Pulley System, 60' rope
Model: SPVML-2M

Specifically designed as an economical system for getting PV modules on rooftops quickly and safely without damaging them, this lift is compatible with fiberglass extension ladders from Werner and...

Fluke SB-500 Shaft Brushes Set for the SVS-500 and MDA-500 Series
Model: SB-500

For use with MDA-500 Motor Drive Analyzer models.

Fluke PPA9608-CAL Incremental Weights for psi Weight Sets
Model: PPA9608-CAL

This incremental weight set is designed for use with select psi weight sets.

Fluke PPA9159-CAL Fine Increment Weight for kPa, mPa, bar or kgf/cm2 Weight Sets
Model: PPA9159-CAL

This fine increment weight set is designed for use with select kPa, mPa, bar and kgf/cm2 weight sets.

Fluke PM9093 Male BNC to Dual Female BNC Adapter
Model: PM9093/001

Fluke PM9082 Dual Banana Jack (female) to male BNC Adapter
Model: PM9082/001

Set of 2 adapters. Features a maximum signal voltage and a maximum voltage to ground of 600V rms.

Fluke PM9081 Dual Banana Plug (Male) to Female BNC Adapter
Model: PM9081/001

Fluke PK-ADPTR-P3K Adaptor Set for P3000 Test Port, 20MPA
Model: PK-ADPTR-P3K

Adaptor Set for P3000 Test Port, 20MPA

Fluke PK-ADPTR-HC20 Adaptor Set for Standard Test Port, 20MPA
Model: PK-ADPTR-HC20

Adaptor Set for Standard Test Port, 20MPA

Fluke PK-2271A-NPT-HC20 Lines & Fittings Kit for 2271A-NPT-HC20
Model: PK-2271A-NPT-HC20

Lines & Fittings Kit for 2271A-NPT-HC20

Fluke P5551 Pointer Remover/Punch for Select Deadweight Testers
Model: P5551

Remove and refit a pressure gauge's pointer both consistently and quickly using this deadweight tester's pointer remover/punch.

Fluke P5543 Angle Adapter for Select Deadweight Testers
Model: P5543

Expand your deadweight tester's capability with this angle adapter, which uses the standard gauge adapters and positions the gauges at 90º.

Fluke P5542 Adapter Set for Select Deadweight Testers, NPT
Model: P5542

Expand your deadweight tester's capability with this NPT adapter set, which includes 1/8, 1/4, 3/8 and 1/2 NPT adapters.

Fluke P5541 Adapter Set for Select Deadweight Testers, BSP
Model: P5541

Expand your deadweight tester's capability with this BSP adapter set, which includes 1/8, 1/4, 3/8 and 1/2 BSP adapters.